Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1.1 160ton-300ton
Name |
Unit |
XPE-160 |
XPE-200 |
XPE-250 |
Model |
|
S |
H |
S |
H |
S |
H |
Capacity |
Ton |
160 |
200 |
250 |
Rated tonnage point |
mm |
6 |
3 |
6 |
3 |
7 |
3 |
Stroke |
mm |
180 |
130 |
250 |
150 |
280 |
170 |
Stroke per minute |
s.p.m |
30-55 |
40-85 |
20-50 |
35-70 |
20-40 |
30-60 |
Die height |
mm |
450 |
400 |
500 |
450 |
550 |
450 |
Slide adjustment |
mm |
100 |
120 |
120 |
Slide area |
mm |
1600x650 |
1850 x750 |
2300x900 |
Bolster area |
mm |
1800 x760 |
2200x940 |
2500 x1000 |
Side opening |
mm |
700 x450 |
900x600 |
900x600 |
Main motor |
KwxP |
15x4 |
18.5x4 |
22 x 4 |
Slide adjust device |
KwxP |
1x4 |
2x4 |
2x4 |
Air pressure |
kg/cm2 |
6 |
6 |
6 |
Presses precision |
|
GB(JIS)1 class |
GB(JIS)1class |
GB(JIS)1 class |
1.2 400ton-600ton
Name |
Unit |
XPE-300 |
XPE-400 |
XPE-500 |
XPE-600 |
Model |
|
S |
H |
S |
H |
S |
H |
S |
H |
Capacity |
Ton |
300 |
400 |
500 |
600 |
Rated tonnage point |
mm |
7 |
3 |
7 |
3 |
10 |
6 |
10 |
6 |
Stroke |
mm |
300 |
170 |
300 |
170 |
300 |
180 |
300 |
180 |
Stroke per minute |
s.p.m |
20-35 |
30-50 |
20-30 |
20-40 |
18-25 |
20-30 |
15-25 |
20-30 |
Die height |
mm |
550 |
450 |
550 |
450 |
580 |
480 |
600 |
500 |
Slide adjustment |
mm |
120 |
120 |
120 |
120 |
Slide area |
mm |
2300x900 |
A:2300x1000 |
2900x1000 |
3100x1100 |
B:2400x1000 |
C:2800x1000 |
Bolster area |
mm |
2500x1000 |
A:2500x1000 |
3300x1200 |
3500x1200 |
B:2800x1000 |
C:3200x1000 |
Side opening |
mm |
900x600 |
900x600 |
1000x750 |
1100x750 |
Main motor |
KwxP |
30x4 |
37x4 |
45x4 |
55x4 |
Slide adjust device |
KwxP |
2x4 |
2x4 |
3x4 |
3x4 |
Air pressure |
kg/cm2 |
6 |
6 |
6 |
6 |
Presses precision |
|
GB(JIS)1class |
GB(JIS)1 class |
GB(JIS)1class |
GB(JIS)1 class |
1.3 Transfer Bar-feeder Press Line
Model |
RBT-2 |
RBT-2 |
Feed Length(mm) |
~1200 |
~1500 |
Up/Down Stroke(mm) |
~100 |
~100 |
Cycle Time(sec) |
1.7~ |
2.5~ |
Max. Workpiece Weight(kg) |
4.0x2 |
4.0x2 |
Repeatability(mm) |
±0.3 |
±0.3 |
Motor Power(kw) |
2 |
Workpiece Pick Up |
Vacuum• Magnet |
Machine Weight(kg) |
400 |
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two-wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is equip with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally advanced duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
Dry clutch brake
Standard operating system of xieduan
Operation Method Choice/inch stroke /safe journey/continuation of operating mode
Oil pressure overload protection device
Over-run safety device
Duplex magnetic valve
Misfeed detection device
Electric slider adjusting device
Digital moulding-height indicator (unit: 0.1 mm)
Electric butter lubricating device
Accumulative counter (6 digits)
Pre-determined counter (6 digits)
Maintenance counter (6 digits)
Service Life counter (6 digits)
Electronic rotary cam switch (6 connections)
Air-blast device 1/2" primary circuit
Air source connector 1/2" secondary circuit
Error inspection socket
Power socket (only apply to single-phase 110V power)
Optional Configuration:
Wet clutch brake
Die cushion device
Vs variable-speed motor
Touch-screen device
Photo-electric safety device
Knock-out device on Ram
Main motor inversion device
Foot switch
Safety dog and safety latch
T-type two-hand button operating platform
Inspection variable-connection magnetic valve
Anti-vibration mechanical foot
Quick Die Change Device
Upper die clamper
Lower die clamper
Die lifter
Mould-shift arm
Basic bolt and soleplate
Automatic feeder device
Three-in-one NC straightening feeder
NC Servo Roll feeder
Two-in-one feeder and straightening machine
Leveller