Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
| Name |
Unit |
XPC-110 |
XPC-160 |
XPC-200 |
XPC-250 |
|
| Model |
|
V |
H |
V |
H |
V |
H |
V |
H |
| Capacity |
Ton |
110 |
160 |
200 |
250 |
| Rated tonnage point |
mm |
5 |
3 |
6 |
3 |
6 |
3 |
7 |
3.5 |
| Stroke |
mm |
180 |
110 |
200 |
130 |
250 |
150 |
280 |
170 |
| Stable speed |
s.p.m |
35-65 |
50-100 |
30-55 |
40-85 |
25-45 |
35-70 |
20-35 |
30-60 |
| Die height |
mm |
400 |
435 |
450 |
485 |
500 |
550 |
550 |
605 |
| Slide adjustment |
mm |
100 |
100 |
120 |
120 |
| Bolster area |
mm |
1800 x 650 x 130 |
2000 x 760 x 150 |
2400 x 340 x 170 |
2700 x 900 x 170 |
| Slide area |
mm |
1400 x 500 x 70 |
1600 x 550 x 70 |
1850 x 650 x 95 |
2100 x 700 x 95 |
| Main motor |
kwxP |
11 x 4 |
15 x 4 |
18.5 x 4 |
22 x 4 |
| Presses weight |
Ton |
14.2 |
20 |
27.5 |
45.5 |
| Air pressure |
kg/cm2 |
5 |
5 |
5 |
5 |
| Presses precision |
|
JIS(CNS) I class |
| Die cushion capacity |
|
Two plate Double cylinders |
| Capacity |
Ton |
3.6 x 2 |
6.3 x 2 |
10 x 2 |
14 x 2 |
| Air pressure |
kg/cm2 |
6 |
6 |
6 |
6 |
| Stroke |
mm |
70 |
70 |
80 |
100 |
| Die cushion work part dimension |
mm2 |
350 x 235 x 2 Group |
410 x 260 x 2 Group |
540 x 350 x 2 Group |
640 x 470 x 2 Group |
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two- wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is necessary to equip with two balancers.
* Moulding-adjustment precision is as high as 0.1 mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
* Dry clutch brake
* Standard operating system of xieduan
* Operation Choice/cutting/inch stroke /safe journey/continuation of operating mode
* Oil pressure overload protection device
* Over-run safety device
* Duplex magnetic valve
* Misfeed detection consent
* Electric slider adjusting device
* Digital moulding-height indicator (unit: 0.1 mm)
* Electric butter lubricating device
* Accumulative counter (6 digits)
* Pre-determined counter (6 digits)
* Maintenance counter (6 digits)
* Life counter (6 digits)
* Electronic rotatry cam switch (6 connections)
* Air-blast device 1/2" primary circuit
* Air source connector 1/2" secondary circuit
* Error inspection socket
* Power socket (only apply to single-phase 110V power)
Optional Configuration:
* Wet clutch brake
* Die cushion device
* Vs variable-speed motor
* Touch-screen device
* Photo-electric safety device
* Knock-out Device of ram
* Main motor inversion device
* Foot switch
* Safety dog and safety latch
* T-type two-hand button operating platform
* Inspection variable-connection magnetic valve
* Anti-vibration mechanical foot
* Rapid tooling exchange
* Upper die clamper
* Lower die clamper
* Die lifter
* Mould-shift arm
* Basic bolt and soleplate
* Automatic feeder device
* Three-in-one NC straightening feeder
* NC Roll feeder
* Two-in-one feeder and straightening machine
* Leveller
Audited Supplier 
){kind=link}