Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1) EDS 80ton ~260ton Parameters
Name | Unit | XDS-80 | XDS-110 | XDS-160 | XDS-200 | XDS-260 |
Model | | V | H | V | H | V | H | V | H | V | H |
Capacity | Ton | 80 | 110 | 160 | 200 | 260 |
Rated tonnage point | mm | 6 | 3 | 6 | 3 | 6 | 3 | 6 | 3 | 6 | 3 |
Speed changing | s.p.m | 37-75 | 55-110 | 32-65 | 50-100 | 27-55 | 40-85 | 25-50 | 35-70 | 20-40 | 40-60 |
Stable speed | s.p.m | 60 | 50 | 45 | 40 | 30 |
Stroke | mm | 130 | 100 | 150 | 110 | 200 | 130 | 250 | 160 | 250 | 180 |
Die height | mm | 320 | 335 | 350 | 370 | 420 | 455 | 450 | 495 | 500 | 535 |
Slide adjustment | mm | 80 | 100 | 100 | 120 | 120 |
Slide area | mm | 560x450 | 620x530 | 700x550 | 850x650 | 950x700 |
Bolster area | mm | 1000x600x140 | 1150x680x150 | 1250x760x160 | 1450x840x180 | 1500x840x190 |
Shank hole | mm | 50 | 50 | 65 | 65 | 65 |
Main motor | kw.p | 7.5x4 | 11x4 | 15x4 | 18.5x4 | 22x4 |
Slide adjust device | HP | 0.4x4 | 0.4x4 | 0.75x4 | 0.75x4 | 1.5x4 |
Air pressure | kg/cm2 | 6 | 6 | 6 | 6 | 6 |
Presses precision | | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class |
Die cushion capacity | Ton | 3.6 | 4.7 | 6.3 | 6.3 | 11.7 |
Stroke | mm | 70 | 80 | 80 | 100 | 100 |
Die cushion effective area | mm2 | 350x300 | 450x350 | 500x350 | 640x420 | 700x470 |
2) Servo Feeder:
Model | Stock widthl(mm) | Stock Thickness(mm) | Stock Thickness × Stock widthl(mm) | Pass Line (mm) | Releasing Performance (SPM) | Motor (kw) |
RNC-100 | 20-100 | 0.1-3.2 | 3.0 × 100/3.2×80 | 70-170 | ~200 | AC 0.4 |
RNC-200 | 20-200 | 0.1-3.2 | 2.3×200/3.2×80 | 70-170 | ~200 | AC 0.4 |
RNC-300 | 20-300 | 0.1-3.2 | 2.0×300/3.2×80 | 70-170 | ~200 | AC 0.75 |
RNC-200HA | 20-200 | 0.3-3.2 | 2.3×200/3.2×80 | 70-170 | ~80 | AC 0.4 |
RNC-300HA | 20-300 | 0.3-3.2 | 2.0×300/3.2×80 | 70-170 | ~80 | AC 0.75 |
RNC-400HA | 20-400 | 0.3-3.2 | 1.6×400/3.2×50 | 70-170 | ~80 | AC 0.75 |
RNC-600HA | 20-600 | 0.3-3.2 | 1.2×600/3.2×50 | 70-170 | ~60 | AC 1.3 |
RNC-800HA | 20-800 | 0.3-3.2 | 1.0×800/3.2×50 | 70-170 | ~60 | AC 2.9 |
RNC-200F | 20-200 | 0.2-3.2 | 2.3×200/3.2× 100 | 70-170 | ~200 | AC 0.4 |
RNC-300F | 20-300 | 0.2-3.2 | 2.3×300/3.2×80 | 70-170 | ~200 | AC 0.4 |
RNC-400F | 20-400 | 0.2-3.2 | 1.6×400/3.2×60 | 70-170 | ~150 | AC 0.75 |
3) Decoiler with Straightener:
Model | RGL-200 | RGL-300 | RGL-400 | RGL-500 | RGL-600 |
Width of Material (mm) | 200 | 300 | 400 | 500 | 600 |
Thickness of Material (mm) | 0.3-3.2 |
Line Speed (m/min) | 16 |
Straightener Roll (Qty) | Top3 /Bottom4 (4 Bottom Rolls have Drive Function) |
Pinch Roll (Inlet/Outlet) (Qty) | lnlet:2/Outlet:2 |
Max. Meterial Weight (kg) | 1000 | 1000 | 1500 | 2000 | 2000 |
Extent Expansion(mm) | 460 ~ 520 |
Coil O.D. (Mm) | 1200 | 1200 | 1200 | 1200 | 1200 |
Mandrel Expansion | Manual |
Power Supply | 3Phase 220V/380V/50HZ |
Product Features :
* The precision of adjusting up to 0.1mm,safety,reliable and convenient.
* Crank,gear,connec bar are oxidized hardening and milled,having super comprehensive mechanical performance and durable function.
* Used reliable high clutch/break and international up-to-date twin electomagnetic valve,overloading protector can guarantee the precision of slider running and stop and safe production of the machine.
* Reasonable structural design, is benefit for automation prodution and reduce cost, improve effciency.
* Advanced design principle, low noise, low consumption, low cost, save energy.
Standard Configuration :
* Inverter
* Hydraulic over-load protector
* Elec tric slider adjusting device
* Touch screen (pre-judge, pre-cut, and total count)
* Slider and mould balancing device
* Misfeed detection consent
* Power socket
* Crank angle indicator
* Counter
* Air source connector
* Over-run safety device
Optional Configuration :
* High performance wet clutch & brake
* Electrical automatic lubrication system
* Pneumatic die cushion device
* Foot switch
* Quick die change device (die lifter, clamp and die arm sepjes)
* Slide knock-out device
* Anti-vibration press mount
* Photo-electronic safety device
* Feeder(air, machinery, and NC)
* Touch pad (preset total counter)